Pluggable design greatly facilitates user maintenance, avoids various troubles and high time costs caused by return-to-factory maintenance, and facilitates unified power management through DC input, which can be remotely controlled through RS232 serial port
Wavelength:976/915/808nm
Output power: Up to 50W
Fiber core diameter: 200μm
Optical fiber numerical aperture:0.22 NA
Plastic welding
Scientific research
Laser Soldering
Specifications (25℃) |
Unit |
MS-A50 |
MS-B50 |
MS-C30 |
|
Optical Data(1) |
CW Output Power |
W |
50 |
50 |
30 |
Center wavelength |
nm |
976±10 |
915±10 |
808±10 |
|
Spectral width(FWHM) |
nm |
<6 |
|||
Wavelength shift with temperature |
nm/°C |
0.3 |
|||
Output power instability(25℃) |
% |
±3(5 hours) |
|||
Power Range |
% |
10~100 |
|||
Fiber Data(1) |
Core diameter |
µm |
200/400 |
||
Numeric aperture |
- |
0.22 |
|||
Pluggable fiber |
m |
5 m/10 m, 3 mm armor, SMA905 male heads at both ends |
|||
Fiber termination |
- |
SMA905 female |
|||
Electrical Data |
Power supply |
V |
DC 24V |
||
Iuput Current |
A |
<7A |
|||
Power consumption |
W |
<150 |
|||
Drive mode |
- |
Constant current |
|||
Emission mode |
- |
CW or Modulated 1 Hz to 20kHz, |
|||
Control mode |
- |
RS232, I/O |
|||
Modulation frequency |
Hz |
1~20K (DC>0.01%) |
|||
Modulation Pulse Width |
- |
20µs -950ms (Pulse)/20µs-999ms (Single Pulse) |
|||
Modulation Rise/Fall Time (Min. Value) |
µs |
≤10 |
|||
Aiming Beam Data(2) |
Center wavelength |
nm |
635±10nm |
||
CW Output Power |
mW |
2 |
|||
Mechanical Parameters |
Dimensions (L×W×H)(3) |
mm |
242*156*120 |
||
Weight |
kg |
<5 |
|||
Others |
Cooling method |
- |
Air cooling |
||
Storage temperature(4) |
℃ |
5~50 |
|||
Temperature Ambient in Operation(4) |
℃ |
15~30 |
|||
Cooling requirement |
- |
Air cooling |
|||
Relative Humidity |
% |
5~80 |
|||
Safety class |
- |
4(EN 60825-01) |
(1)Consult BWT for other available options.
(2)The aiming beam can be customized according to customer requirements.
(3)The mechanical dimensions depends on the laser power and cooling mode.
(4)A non-condensing environment is required for operation and storage
♦ Avoid eye and skin exposure to direct radiation during operation.
♦ Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber.
♦ Laser diode must be used according to the specifications.
♦ Temperature Ambient in Operation ranges from 15℃ to 30℃.
♦ Storage temperature ranges from 5℃ to 50℃.