Manufacturer of fiber mode - 940nm Fiber coupled diode laser with 20W output power – BWT

Short Description:

Product Detail

Product Tags

Feedback (2)

Our personnel are always in the spirit of "continuous improvement and excellence", and together with the top-quality good quality solutions, favorable selling price and superior after-sales providers, we try to acquire each customer's rely on for Single Fiber , Laser Diode , 60 Watt Laser Diode , With our rules of " business reputation, partner trust and mutual benefit", welcome all of you to work together , grow together.

Manufacturer of fiber mode - 940nm Fiber coupled diode laser with 20W output power – BWT Detail:

Product Features:

The overall research and development of 940nm-20W fiber laser pump source diode lasers is based on a variety of coupling technology solutions. A variety of coupling technologies can control power, brightness, and wavelength to meet the customized product needs of different customers.

The production process of this product uses a large number of automated equipment to ensure the consistency of batch product performance; after nearly 20 years of accumulated production experience by professional and technical personnel, our standardized quality control of each production raw material can ensure the long-term reliability of the product ;

Main Features

Wavelength：940nm
Output power: 20W
Fiber core diameter: 105μm
Optical ﬁber numerical aperture：0.22
Feedback protection: 1400nm-1600nm

Instructions for use

- Please connect pins to wires by solder instead of using socket when operation current is higher than 6A.
- Soldering point should be close to the middle of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second.
- Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber.
- Use constant current power supply to avoid surge current during operation.
- Laser diode must be used according to the specifications.
- Laser diode must work with good cooling.

PRODUCT PARAMETERS

Specifications (25°C)		Symbol	Unit	Minimum	Typical	Maximum
Optical Data(1)	CW OutputPower	Po	w	20	-	-
	Center Wavelength	λc	nm	940 ±3
	Spectral Width(FWHM)	△λ	nm	-	3	6
	Wavelength Shift with Temperature	△λ/△T	nm/°C	-	0.3	-
	Wavelength Shift with Current	△λ/△A	nm/A	-	0.6	-
Electrical Data	Electrical-to-Optical Efficiency	PE	%	-	52	-
	Operating Current	Iop	A	-	12	13
	Threshold Current	Ith	A	-	1.2	-
	Operating Voltage	Vop	V	-	3.2	3.6
	Slope Efficiency	η	W/A	-	1.8	-
Fiber Data	Core Diameter	Dcore	μm	-	105	-
	Cladding Diameter	Ddad	μm	-	125	-
	Numeric Aperture	NA	-	-	0.22	-
	Fiber Length	Lf	m	-	1	-
	Fiber Loose Tubing Diameter	-	mm	0.9
	Minimum Bending Radius	-	mm	50	-	-
	Fiber Termination	-	-	None
Feedback Isolation	Wavelength Range	-	nm	1400-1600
Feedback Isolation	Isolation	-	dB	-	30	-
Others	ESD	Vesd	V	-	-	500
	Storage Temperature⑵	Tst	°C	-20	-	70
	Lead Soldering Temp	Tls	°C	-	-	260
	Lead Soldering Time	t	sec	-	-	10
	Operating Case Temperature(3)	Top	°C	15	-	35
	Relative Humidity	RH	%	15	-	75

(1) Data measured under operation output at 20W@25°C.
(2) A non-condensing environment is required for operation and storage.
(3) Operating temperature defined by the package case. Acceptable operating range is 15°C~35°C, but performance may vary.

Product detail pictures:

Related Product Guide:

We're commitment to offer you the competitive price ,remarkable products excellent, also as fast delivery for Manufacturer of fiber mode - 940nm Fiber coupled diode laser with 20W output power – BWT , The product will supply to all over the world, such as: USA, Puerto Rico, Ghana, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We've got tightened inspection for quality of product.

30 Watt Laser Diode