2021 Latest Design laser diode module - 445nm – 50W blue diode laser MK series for Material Processing – BWT
2021 Latest Design laser diode module - 445nm – 50W blue diode laser MK series for Material Processing – BWT Detail:
Product Features:
The power of the MK series blue diode laser is 50W, with high reliability and low cost, has passed 2000 hours long-term aging test, this series is suitable for cost-sensitive applications such as soldering.
Blue diode laser has the advantage of high photon energy in the field of metal processing, and has the characteristics of high absorption rate and no spatter in the processing of copper and other metal materials. Secondly, it has irreplaceable advantages in the field of 3C electronics and lithium battery welding.
BWT is the company with the most complete blue laser product line in China, with a wavelength range of 405-1470nm. We have solutions for different wavelengths. For soldering and plastic welding, there are: 976/915/808nm blue diode laser products, as well as system-level products
Main Features
Wavelength: 445nm
Output Power: 50W
200µm /0.22NA
Applications:
Material Processing
3D Printing
Illuminating
Instructions for use
- Please connect pins to wires by solder instead of using socket when operation current is higher than 6A.
- Soldering point should be close to the middle of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second.
- Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber.
- Use constant current power supply to avoid surge current during operation.
- Laser diode must be used according to the specifications.
PRODUCT PARAMETERS
| Specifications (25°C) | Symbol | Unit | Minimum | Typical | Maximum | |
| Optical Data ( 1 ) | CW Output Power | Po | w | 50 | - | - |
| Center Wavelength | λc | nm | 445±10 | |||
| Spectral Width(FWHM) | △λ | nm | - | 5 | - | |
| Electrical Data | Electrical-to-Optical Efficiency | PE | % | - | 25% | - |
| Operating Current | Iop | A | - | 3.5 | - | |
| Threshold Current | Ith | A | - | 0.3 | - | |
| Operating Voltage | Vop | V | - | 60 | - | |
| Fiber Data | Core Diameter | Dcore | μm | - | 200 | - |
| Cladding Diameter | Dclad | μm | - | 220 | - | |
| Numeric Aperture | NA | - | - | 0.22 | - | |
| Fiber Length | Lf | m | - | 1.0 | - | |
| Fiber Loose Tubing Diameter | - | mm | 3mm metal jacket | |||
| Minimum Bending Radius | - | mm | 60 | - | - | |
| Fiber Termination | - | - | SMA905 | |||
| Others | ESD | Vesd | V | - | - | 500 |
| Storage Temperature( 2) | Tst | °C | -20 | - | 70 | |
| Lead Soldering Temp | Tls | °C | - | - | 260 | |
| Lead Soldering Time | t | sec | - | - | 10 | |
| Operating Case Temperature( 3 ) | Top | °C | 15 | - | 35 | |
| Relative Humidity | RH | % | 15 | - | 75 | |
(1) Data measured under operation output at 50W@25°C.
(2) A non-condensing environment is required for operation and storage.
(3) Operating temperature defined by the package case. Acceptable operating range is 15°C~35°C, but performance may vary.
Product detail pictures:
Related Product Guide:
Our goal is to satisfy our customers by offering golden service, good price and high quality for 2021 Latest Design laser diode module - 445nm – 50W blue diode laser MK series for Material Processing – BWT , The product will supply to all over the world, such as: Thailand, Nepal, Oman, We believe that good business relationships will lead to mutual benefits and improvement for both parties. We have established long-term and successful cooperative relationships with many customers through their confidence in our customized services and integrity in doing business. We also enjoy a high reputation through our good performance. Better performance will be expected as our principle of integrity. Devotion and Steadiness will remain as ever.
By Phyllis from Norway - 2018.12.11 14:13
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Edith from Spain - 2018.12.30 10:21
