The fiber laser pump source diode laser 915nm-300W adopts a variety of coupling and thermal management technologies that BWT has experienced over the years. Through the continuous improvement of BWT’s professional technical team, this technology can control power and wavelength based on customer needs. The product wavelength range includes various pump bands required by fiber lasers, and the optional power range is wide. It greatly enriches the customer’s choice of products.
During the production process, BWT’s quality control personnel conduct multiple quality inspections on each chip and component to ensure product reliability. BWT introduces European standards, and experienced Chinese and European R&D personnel can also guarantee the product’s use effect.
Output power: 300W
Fiber core diameter: 200μm
Optical ﬁber numerical aperture：0.22
Feedback protection: 1020nm-1200nm
- Avoid eye and skin exposure to direct radiation during operation.
- ESD precautions must be taken during storage, transportation and operation.
- Short-circuit is required between pins during storage and transportation.
- Please connect pins to wires by solder instead of using socket when operation current is higher than 6A.
|Optical Data(1)||CW OutputPower||Po||w||300||-||-|
|Wavelength Shift with Temperature||△λ/△T||nm/°C||-||0.3||-|
|Electrical Data||Electrical-to-Optical Efficiency||PE||%||-||50||-|
|Fiber Data||Core Diameter||Dcore||μm||-||200||-|
|Fiber Loose Tubing Diameter||-||mm||0.9|
|Minimum Bending Radius||-||mm||88||-||-|
|Feedback Isolation||Wavelength Range||-||nm||1020-1200|
|Lead Soldering Temp||Tls||°C||-||-||260|
|Lead Soldering Time||t||sec||-||-||10|
|Operating Case Temperature(3)||Top||°C||15||-||35|